Adhesively bonded joints composed of pultruded adherends: Considerations at the upper tail of the material strength statistical distribution

The Weibull distribution, used to describe the scaling of strength of materials, has been verified on a wide range of materials and geometries; however, the quality of the fitting tended to be less good towards the upper tail. Based on a previously developed probabilistic strength prediction method for adhesively bonded joints composed of pultruded glass fiber-reinforced polymer (GFRP) adherends, where it was verified that a two-parameter Weibull probabilistic distribution was not able to model accurately the upper tail of a material strength distribution, different improved probabilistic distributions were compared to enhance the quality of strength predictions. The following probabilistic distributions were examined: a two-parameter Weibull (as a reference), m$m$-fold Weibull, a Grafted Distribution, a Birnbaum–Saunders Distribution and a Generalized Lambda Distribution. The Generalized Lambda Distribution turned out to be the best analytical approximation for the strength data, providing a good fit to the experimental data, and leading to more accurate joint strength predictions than the original two-parameter Weibull distribution. It was found that a proper modeling of the upper tail leads to a noticeable increase of the quality of the predictions.     

Estimation of atmospheric lifetimes of hydrofluorocarbons, hydrofluoroethers, and olefins by chlorine photolysis using gas-phase NMR spectroscopy

An empirical correlation has been derived between accepted atmospheric lifetimes of a set of hydrofluorocarbons and hydrofluoroethers and relative rates of reaction with photolyzed chlorine in excess at ambient temperature. These kinetic systems were studied by nuclear magnetic resonance (NMR) spectroscopy in the gas phase, marking the first application of NMR spectroscopy to this field. The square of the Pearson coefficient R for the linear correlation between observed reaction rates and accepted atmospheric lifetimes was 0.87 for compounds of lifetime less than 20 years. The method was extended to the study of ethene and propene; the rate of reaction of propene was found to be 1.25 times that of ethene at 23 degrees C. The chief advantage of this method is its simplicity and reliance only on common tools and techniques of an industrial chemical laboratory.     

Quantitative LC-MS of polymers: determining accurate molecular weight distributions by combined size exclusion chromatography and electrospray mass spectrometry with maximum entropy data processing

We report on the successful application of size exclusion chromatography (SEC) combined with electrospray ionization mass spectrometry (ESI-MS) and refractive index (RI) detection for the determination of accurate molecular weight distributions of synthetic polymers, corrected for chromatographic band broadening. The presented method makes use of the ability of ESI-MS to accurately depict the peak profiles and retention volumes of individual oligomers eluting from the SEC column, whereas quantitative information on the absolute concentration of oligomers is obtained from the RI-detector only. A sophisticated computational algorithm based on the maximum entropy principle is used to process the data gained by both detectors, yielding an accurate molecular weight distribution, corrected for chromatographic band broadening. Poly(methyl methacrylate) standards with molecular weights up to 10 kDa serve as model compounds. Molecular weight distributions (MWDs) obtained by the maximum entropy procedure are compared to MWDs, which were calculated by a conventional calibration of the SEC-retention time axis with peak retention data obtained from the mass spectrometer. Comparison showed that for the employed chromatographic system, distributions below 7 kDa were only weakly influenced by chromatographic band broadening. However, the maximum entropy algorithm could successfully correct the MWD of a 10 kDa standard for band broadening effects. Molecular weight averages were between 5 and 14% lower than the manufacturer stated data obtained by classical means of calibration. The presented method demonstrates a consistent approach for analyzing data obtained by coupling mass spectrometric detectors and concentration sensitive detectors to polymer liquid chromatography.     

Reduction of nitrogen dioxide by propene over acidic mordenites: influence of acid site concentration, formation of by-products and mechanism

The reduction of nitrogen dioxide to nitrogen by propene was studied over a variety of acidic mordenite zeolites differing in their Si : Al ratio and thus, in their concentration of acid sites. The formation of by-products was monitored applying an ion–molecule reaction (IMR) mass spectrometer. It was found that at fixed conditions the yield of nitrogen increases with increasing concentration of acid sites, confirming that acid sites are the active catalytic centres in the reaction. Apart from nitrogen and nitric oxide, acrylonitrile and ammonia are formed as nitrogen containing gas-phase products in the reaction. In separate experiments, it was shown that acrylonitrile is hydrolysed by water over the acidic zeolites to yield ammonia and acrylic acid. When acrylonitrile is used as reducing agent for nitrogen dioxide, formation of nitrogen is strongly enhanced in the presence of water. Water also has a promoting effect on the formation of nitrogen in the reaction between nitrogen dioxide and propene. Acrylonitrile and its product of hydrolysis, ammonia, are considered to be intermediates of nitrogen dioxide reduction to nitrogen by propene over acidic zeolites.     

High-resolution capillary tube NMR. A miniaturized 5-microL high-sensitivity TXI probe for mass-limited samples,off-line LC NMR,and HT NMR

A new triple-resonance (TXI) (1H, 13C, 15N) high-resolution nuclear magnetic resonance (NMR) capillary probe with 2.5-microL NMR-active sample volume (V(obs)) was built and tested for applications with mass- and volume-limited samples and for coupling of microbore liquid chromatography to NMR. This is the first microliter probe with optimized coil geometry for use with individual capillary tubes with an outer diameter of 1 mm. The 90 degree pulse lengths of the 1-mm microliter probe were below 2 micros for proton, below 8 micros for carbon, and below 20 micros for nitrogen, and a spectral line width at signal half-height below 1 Hz was obtained. Compared to a conventional 5-mm probe, the new 600-MHz 1-mm TXI microliter probe with z-gradient shows an increase in mass sensitivity by a factor of 5, corresponding to a 25-fold reduction in measuring time. The consumption of costly deuterated solvent is reduced by at least 2 orders of magnitude. The 1-mm TXI microliter probe with z-gradient allows the measurement of one-dimensional 1H NMR and two-dimensional heteronuclear NMR spectra with a few nanomoles (micrograms) of compound with high sensitivity, speed, and quality. This is a breakthrough for discrete sample NMR spectroscopy with paramount importance for structure elucidation in natural compound chemistry and metabolic research. It offers also advantages for linking chromatographic methods to NMR in a nindustrial environment. Capillary tube NMR may find new applications in areas where high sample throughput is essential, e.g., in the quality control of large sample arrays from parallel chemistry, screening, and compound depositories. It has the potential to increase the sample throughput by 1 order of magnitude or more if new hardware for fast sample handling and exchange becomes available.     

Workflow View Driven Cross-Organizational Interoperability in a Web Service Environment

Workflow technology has recently been employed not only within businesses but also as a framework for implementing e-services over the Internet. Such e-services typically require collaborative enactment of workflows across multiple organizations. In this paper, we propose the use of workflow views as a fundamental support mechanism for the interoperability of multiple workflows across business organizations. We present a meta-model of workflow views and their semantics using a cross-organization workflow example based on a supply-chain e-service. We also formulate an interoperation model of workflow views and its consistency criteria. Finally, this paper presents an implementation of the model based on XML and contemporary Web services technologies, with adaptation to our E-ADOME workflow engine.     

Activation of phosphorothionate pesticides based on a cytochrome P450 BM-3 (CYP102 A1) mutant for expanded neurotoxin detection in food using acetylcholinesterase biosensors

A novel enzymatic in vitro activation method for phosphorothionates has been developed to allow their detection with acetylcholinesterase (AChE) biosensors. Activation is necessary because this group of insecticides shows nearly no inhibitory effect toward AChE in their pure nonmetabolized form. In contrast, they exert a strong inhibitory effect on AChE after oxidation as it takes place by metabolic activation in higher organisms. Standard chemical methods to oxidize phosphorothionates showed inherent disadvantages that impede their direct use in food analysis. In contrast, a genetically engineered triple mutant of P450 BM-3 (CYP102 A1) could convert the two frequently used insecticides parathion and chlorpyrifos into their oxo variants as was confirmed by GC/MS measurements. The wild-type protein was unable to do so. In the case of chlorpyrifos, the enzymatic activation was as good as the chemical oxidation. In the case of parathion, the P450 activation was more efficient than the oxidation by NBS but neither activation method yielded an AChE inhibition that was as high as with paraoxon. The application of the method to infant food in combination with a disposable AChE biosensor enabled detection of chlorpyrifos and parathion at concentrations down to 20 microg/kg within an overall assay time of 95 min.     

Direct Evidence for Membrane Transport of Host-Plant-Derived Pyrrolizidine Alkaloid N-Oxides in Two Leaf Beetle Genera

The chrysomelid leaf beetles Longitarsus jacobaeae, Oreina cacaliae, and O. speciosissima sequester pyrrolizidine alkaloids from their asteracean host plants and store them as nontoxic N-oxides. Previous analyses showed that Longitarsus is able to N-oxidize protoxic tertiary PAs, but did not resolve in which form N-oxides are taken up. For Oreina, beetles seem able to directly transmit the polar PA N-oxides from the gut into the hemolymph and prevent any reduction of them in the gut yielding protoxic free bases. Here, we confirm the predicted direct uptake of PAs as N-oxides by Oreina, and elucidate the situation for Longitarsus by applying double-labeled [14C]senecionine [18O]N-oxide as tracer. The beetles were fed with the tracer and subsequently senecionine N-oxide was recovered from the defensive secretions (Oreina) and beetle extracts (Longitarsus), purified by HPLC, and submitted to ESI-MS, GC-MS, and analysis of the specific radioactivity. The 18O-label is retained without any loss in the labeled senecionine N-oxide recovered from the two Oreina species. Analysis of the Longitarsus experiment was complicated by a contamination of the HPLC-purified senecionine N-oxide with a second compound, identified as a dihydrosenecionine N-oxide by high-resolution CID analysis. The dihydrosenecionine N-oxide, probably the 15,20-dihydro derivative, constitutes a major idiosyncratic senecionine metabolite present in the beetle. The recovered senecionine N-oxide retained 74% 18O-label. The remaining 25% is mostly due to loss of 18O by reduction and subsequent re-N-oxidation. The experiments confirm for both beetle genera a direct uptake of the polar nontoxic PA N-oxides, which requires specific membrane carriers. Accumulation of detrimental free base PA is prevented by glucosylation (Oreina) or N-oxidation (Longitarsus).     

How important is the interfacial chemical bond for electron transport through alkyl chain monolayers?

We show that the electrode/molecule chemical bond does not change the tunneling barrier for charge transport through alkyl chain monolayers sandwiched between Si and Hg electrodes. This observation can be understood if the interfacial bond mainly governs the monolayer's structure, while the electronic states due to molecule-electrode bonding do not contribute significantly to tunneling. Yet, the nature of the bond affects the Schottky barrier inside the semiconductor due to changes in the interface dipole.